|
|
manager
Products >> Aerodynamic heat transfer machine heat transfer machine
Build Your Online Product Catalogs?
| Product Name: |
Aerodynamic heat transfer machine heat transfer machine
|
| Supply Ability: |
The 100000 station |
| Related proudcts |
printing machine, heat transfer machin, heat transfer machin, |
| Specifications |
40*40cm 40*50cm 50*60cm 40*60cm |
| Price Term: |
FOB |
| Port of loading: |
Fengshen Logistics |
| Minimum Order |
The 1 station |
| Unit Price: |
To discuss |
|
Product features:
1 fully automated control, work completion signal indication, high accuracy;
The 2 heat pipe and the heating plate in whole, safe and durable, heat distribution;
3 automatic digital display time control;
4 pressure adjustment is convenient; widely used in factory assembly line
5 beautiful and elegant structure
Operation process
Note: the machine must have a suitable reliable protection ground.
1 turn on the power switch, the temperature time pressure to the desired requirements.
2 when the temperature is reached, will switch to " manual" position, on the hot required products, quality approval before switching to " automatic " position of mass production.
3 when the switch to " manual " position, the hand press " start " heating plate is pressed down when the time to automatically rise, such as stamping process was found in the wrong position, then press the " emergency stop " suspended ironing, when the switch to " automatic " position, only the heating plate is pushed in place of fever plate automatic press.
Repair.
1 pressure: if the pressure is not enough or too large, adjustable cylinder upward pressure valve, to ( + ) direction to increase pressure, ( a ) direction of reduced pressure ( please note the cylinders are lubricants ).
2 temperature : when the equipment set temperature after heating plate without heating or heating is not uniform, should check the circuit temperature controller and a thermocouple, such as a thermocouple is broken, the thermostat has a broken lamp, should be replaced with thermocouple.
3 time: when the switch to " manual ", the " manual " will not be under pressure check " manually " switch, when the switch to " automatic ", the bedplate in place when not under the pressure, should check the micro-switch contact points are in place, such as not a should adjust.
4 as a result of quality problems, please contact with the co***ny.
Technical parameters
Voltage: 220V/110V
Temperature: 0-399
Power: 2000W
Time: |
| Company: |
manager
|
| Contact: |
Mr. weijian LU |
| Address: |
Baiyun District falls as fertile village Grange No. 11 Army |
| Postcode: |
|
| Tel: |
8613725100205 |
| Fax: |
86-020-28984166 |
| E-mail: |
|
|
|
|
Home
